 |
| Quantity: | |
|---|---|
4WE6-AC220V Single-Head Solenoid Reversing Valve
4WE6-AC220V single-head solenoid reversing valve is a control component widely used in industrial hydraulic systems. Its core parameters and functional characteristics are as follows:
1. Core parameters
Model definition 4WE6: Solenoid reversing valve series representing 4-diameter, wet solenoid structure.
AC220V: The working voltage of the solenoid is 220V AC.
Single head: means that the valve body is equipped with only one solenoid, which is used to drive the single-side valve core operation.
Key performance indicator diameter: usually 6mm (NG6 specification), corresponding to a flow rate of about 60L/min (AC electric drive).
Operating temperature: -30℃ to +70℃ (hydraulic oil medium), viscosity range 2.8~380mm²/s.
Electrical characteristics: Power consumption: ≤40W (AC 220V);
2. Functional characteristics
Wet electromagnet design The interior of the electromagnet is completely closed, and the armature moves in hydraulic oil, reducing wear and impact and extending service life.
Excellent heat dissipation performance and adapt to high-frequency action needs.
The high circulation capacity adopts casting internal channels, which reduces pressure loss and increases circulation capacity by nearly twice compared with similar products.
The reset and safety mechanism is equipped with a reset spring, and the valve core will automatically return to the middle position after power is cut off;
An optional fault check button can be installed to manually push the valve core for functional verification.
The electrical connection method supports separate or centralized electrical connections and is compatible with multiple control systems;
The electromagnetic coil complies with UL 906 certification and passes CE standard (Low Voltage Directive 2014/35/EU).
III. Application scenarios
Construction machinery: Control the expansion and contraction of hydraulic cylinders to realize the action switching of excavators, cranes and other equipment.
Industrial automation: used in production line hydraulic systems, precisely controlling the start and stop and direction of cylinders or hydraulic motors.
Agricultural machinery: Adjust the hydraulic oil circuit to realize the lifting and steering of agricultural tools such as tractors and harvesters.
Environmental protection equipment: In sewage treatment and waste gas treatment projects, control the flow direction and flow of fluid.
4. Selection and usage suggestions
Selection key points: Select the diameter according to the system flow rate (such as 6mm corresponding to 60L/min);
Confirm the power supply type (AC220V) and the operating frequency requirements;
Consider ambient temperature and hydraulic oil viscosity range.
Before installation and maintenance, the hydraulic system must be thoroughly cleaned to prevent impurities from stagnating the valve core;
Check the cleanliness of hydraulic oil regularly (NAS1638 Level 9 recommended);
After long-term deactivation, the valve core needs to be manually operated to remove condensate.
V. Typical model examples
4WE6E61/AC220V: Rated flow rate 14L/min (diameter 5mm, pressure to 25MPa);
53 types of slide valve functions are available to meet complex working conditions.
4WE6D6X/EG24N9K4: AC 24V and DC 24V dual voltage versions are available;
Plate-type installation, complies with ISO 4401-03-02-0-05 standards.
Summary: 4WE6-AC220V single-head solenoid reversing valve has become the core control element of industrial hydraulic systems with its high reliability, strong compatibility and flexible electrical connection method. When selecting the model, focus on the diameter, pressure and electrical parameters to ensure that they match the system requirements.
4WE6-AC220V single-head solenoid reversing valve is a control component widely used in industrial hydraulic systems. Its core parameters and functional characteristics are as follows:
1. Core parameters
Model definition 4WE6: Solenoid reversing valve series representing 4-diameter, wet solenoid structure.
AC220V: The working voltage of the solenoid is 220V AC.
Single head: means that the valve body is equipped with only one solenoid, which is used to drive the single-side valve core operation.
Key performance indicator diameter: usually 6mm (NG6 specification), corresponding to a flow rate of about 60L/min (AC electric drive).
Operating temperature: -30℃ to +70℃ (hydraulic oil medium), viscosity range 2.8~380mm²/s.
Electrical characteristics: Power consumption: ≤40W (AC 220V);
2. Functional characteristics
Wet electromagnet design The interior of the electromagnet is completely closed, and the armature moves in hydraulic oil, reducing wear and impact and extending service life.
Excellent heat dissipation performance and adapt to high-frequency action needs.
The high circulation capacity adopts casting internal channels, which reduces pressure loss and increases circulation capacity by nearly twice compared with similar products.
The reset and safety mechanism is equipped with a reset spring, and the valve core will automatically return to the middle position after power is cut off;
An optional fault check button can be installed to manually push the valve core for functional verification.
The electrical connection method supports separate or centralized electrical connections and is compatible with multiple control systems;
The electromagnetic coil complies with UL 906 certification and passes CE standard (Low Voltage Directive 2014/35/EU).
III. Application scenarios
Construction machinery: Control the expansion and contraction of hydraulic cylinders to realize the action switching of excavators, cranes and other equipment.
Industrial automation: used in production line hydraulic systems, precisely controlling the start and stop and direction of cylinders or hydraulic motors.
Agricultural machinery: Adjust the hydraulic oil circuit to realize the lifting and steering of agricultural tools such as tractors and harvesters.
Environmental protection equipment: In sewage treatment and waste gas treatment projects, control the flow direction and flow of fluid.
4. Selection and usage suggestions
Selection key points: Select the diameter according to the system flow rate (such as 6mm corresponding to 60L/min);
Confirm the power supply type (AC220V) and the operating frequency requirements;
Consider ambient temperature and hydraulic oil viscosity range.
Before installation and maintenance, the hydraulic system must be thoroughly cleaned to prevent impurities from stagnating the valve core;
Check the cleanliness of hydraulic oil regularly (NAS1638 Level 9 recommended);
After long-term deactivation, the valve core needs to be manually operated to remove condensate.
V. Typical model examples
4WE6E61/AC220V: Rated flow rate 14L/min (diameter 5mm, pressure to 25MPa);
53 types of slide valve functions are available to meet complex working conditions.
4WE6D6X/EG24N9K4: AC 24V and DC 24V dual voltage versions are available;
Plate-type installation, complies with ISO 4401-03-02-0-05 standards.
Summary: 4WE6-AC220V single-head solenoid reversing valve has become the core control element of industrial hydraulic systems with its high reliability, strong compatibility and flexible electrical connection method. When selecting the model, focus on the diameter, pressure and electrical parameters to ensure that they match the system requirements.
